Press Brake Operation
Setting up and operating hydraulic and servo-electric press brakes to bend sheet metal to print. Covers tonnage calculation from material, thickness, and V-die opening, V-die selection and the 8T rule of thumb, springback compensation by over-bending, programming the brake offline so the first piece is in spec, and the two-hand-control and light-curtain safety that keeps fingers out of the point of operation.
Learning Paths
Choose a path that matches your experience level and work toward mastery at your own pace.
Learn how a press brake bends sheet metal, how to select punches and V-dies, calculate tonnage and bend allowance, and use the 8T rule fo...
Bend sheet metal on a press brake without crushing fingers or parts: punch and die selection, V-opening rules of thumb, bend allowance an...